Raspberry Pi & Arduino Projects from Device Plus
January 8, 2016
We’ve been making a RC car until now. But from this section onwards, we’re going to use Arduino with various parts and sensors. Many parts are sold as […]
January 8, 2016
Because I had been using a display without speakers, until now I had been playing with the Raspberry Pi without any sound. I found a small unused […]
January 8, 2016
In the last article, we completed the body of the RC car. But, during the building process, we had some issues. Today, we will continue working […]
January 8, 2016
My job does not require the use of paper. So, I didn’t have a printer setup to my PC until one day… “I want to print this […]
December 24, 2015
In the article “Use Arduino to Control a Motor Part 2“, we went over how to use a motor driver. Today, we will look at the […]
December 24, 2015
Last time, we got to making the LED shine, so now let’s try to make it flash! There are various ways to do this, but since […]
December 24, 2015
Last time, we controlled the ON/OFF switch of a DC motor with Arduino. Today, I’d like to delve deeper into the use of motors. Taking radio-controlled cars […]
December 24, 2015
Finally, I will try my hand at electronic kits using components! (The above picture shows me playing around with LEDs and three types of resistor.) I just […]
November 13, 2015
As we have just finished our series on how to make a Stevenson screen using Arduino, you should have a good understanding of how things are working with Arduino. […]
November 13, 2015
Recently, I got the Raspberry Pi Model B+! It has undergone significant upgrade, even in its appearance! This time, while comparing the differences from the previously […]
November 13, 2015
The is the last part of our series on how to make a Stevenson screen with Arduino. We’ve completed the basic assembly. Now, all that’s left to […]
November 6, 2015
We’ve arrived at part 3 of our series on how to make a Stevenson screen with Arduino. We’ve become quite comfortable using Arduino. Last time, we learned how […]
