Raspberry Pi & Arduino Projects from Device Plus
November 6, 2015
In the previous article, we successfully created a NAS with Raspberry Pi using Samba! If we’re continuing with the original aim of creating a corporate NAS, […]
October 30, 2015
This is the second part of our series on how to make a Stevenson screen. In the first part, we were able to get the temperature […]
October 30, 2015
I know this is kind of random, but I have been asked by one of my superiors to build a company NAS device using Raspberry Pi. At […]
October 30, 2015
The last time, we used the Arduino as a Web server. In the next few entries, we will aim to expand the Web server by building a […]
October 30, 2015
This time, I’ll introduce two different topics! In the first part, I’ll explain you how I made a case for the Raspberry Pi. I could have purchase […]
October 30, 2015
Last time, we displayed the brightness data from the light sensor using analog input on the Arduino. Now, we know how to process both input and output […]
October 30, 2015
Last time, we were finally able to set up the Raspberry Pi! From now on, we should be able to have more fun, so I’d like to […]
October 8, 2015
In a previous article, I introduced the basics of using LED circuits with Arduino. Now, we’ll explore more possibilities by adding other electronic components. Using a Sensor to Send Values […]
September 16, 2015
Last time, I talked about the exterior of the Raspberry Pi, getting the necessary parts ready and connecting them. But, one of the most important part, preparing […]
September 16, 2015
Last time, we learnt the basics about the Raspberry Pi, such as “What is it?” Through the works made with the Raspberry Pi, we were able […]
September 16, 2015
Last time, we looked at various calculations using Ohm’s law as a starting point. It’s an unavoidable subject in order to design an electrical circuit, but […]
September 16, 2015
In our previous article, we explained how to make LEDs twinkle using Arduino with an L circuit. I hope everybody had a chance to try it. That […]