March 24, 2017
arduino and raspberry pi

Guide to Connecting Arduino & Raspberry Pi + DIY Arduino and Raspberry Pi Camera Robot!

Some of the coolest DIY projects are based on either Arduino or Raspberry Pi. They are both great platforms for personalized projects. Aside from their aesthetic […]
October 20, 2016
internet of things (IoT)

Want to Make DIY Internet of Things Projects?

Internet of Things (IoT) – Wikipedia IoT is the internetworking of physical devices, vehicles (also referred to as “connected devices” and “smart devices”), buildings and other […]
June 20, 2017
sense hat

The Sense HAT Add-On Board For Raspberry Pi – 6 Types of Sensors

  Today we’re going to test six onboard sensors on Sense HAT! If you are not familiar with the Sense HAT, please feel free to check […]
June 16, 2017
robotic arm

Smart Robotic Arm – Part 1: Mechanics and Wiring

Have you ever wanted a device that could help you with your daily needs such as a robotic arm? It’s not your ordinary device. It has […]
June 12, 2017
raspbian jessie with pixel

Beginner’s Guide to Raspbian Jessie with PIXEL

Today we’ll cover the basics of Raspbian Jessie with PIXEL. That’s right, the name is no longer Raspbian Jessie. It’s now Raspbian Jessie with PIXEL! You […]
June 6, 2017
arduino preprocessor

Arduino Preprocessor Directives Tutorial

In Lightweight Arduino Library for ROHM Sensor Evaluation Kit, I introduced RohmMultiSensor – Arduino library that allows you to easily interface with multiple sensors in the […]
May 16, 2017
3d airmouse

UCLA “AirMouse” using ROHM Sensor Evaluation Kit – Part 2

  We left off last time in UCLA “AirMouse” using ROHM Sensor Evaluation Kit – Part 1 having finished the hardware portion of the project.  The […]
May 16, 2017
3d airmouse

UCLA “AirMouse” using ROHM Sensor Evaluation Kit – Part 1

Today we introduce a 3D AirMouse inspired by a group of bright engineers from Institute of Electrical and Electronics Engineers (IEEE) Student Branch at the University […]
May 10, 2017
arduino library

Lightweight Arduino Library for ROHM Sensor Evaluation Kit

  ROHM Sensor Evaluation Kit is an Arduino-compatible expansion board (shield) equipped with 8 sensors: accelerometer, barometric pressure sensor, geomagnetic sensor, ambient-light/proximity sensor, color sensor, hall-effect […]
May 9, 2017
reprap 3d printer

DIY RepRap 3D Printer for Beginners – Part 3: Code

If you’re new to this project, please refer back to Part 1 and Part 2 of the project before proceeding further: DIY RepRap 3D Printer for […]
May 8, 2017
reprap 3d printer

DIY RepRap 3D Printer for Beginners – Part 2: Wire

If you’ve been following along with Part 1 of this tutorial, you now have a mechanical shell of a printer. The shell of the printer should […]
May 5, 2017
reprap 3d printer

DIY RepRap 3D Printer for Beginners – Part 1: Build

Have you ever wanted to build your own 3D printer but felt like you didn’t know where to start? This tutorial is the perfect starting point […]
May 4, 2017
kickstarter robots

The Coolest Kickstarter Robots Part 2 – Past Campaigns

This is Part 2 of our series on the coolest Kickstarter-funded robotics projects.   1. Quadbot   Quadbot is an Arduino-based, open-source, 3D Printable, programmable walking […]
May 3, 2017
kickstarter robots

The Coolest Kickstarter Robots Part 1 – Past Campaigns

1. MiroBot     MiroBot is a DIY Wifi drawing robot that even children can easily assemble and use to learn about engineering and programming. Created […]